MIOX AE Series Operators Manual
102-00085-E
Page
16
Wiring of the Control Box Interface Block
After wiring the electrical components on the mounting plate, the wires must be fed through the fittings
on the bottom of the control box and wired to the Interface Block. The Interface block is the termination
for all electrical components outside of the control box. Refer to Appendix C – AE System Wiring
Schematic for wiring details of the system control board, interface block, and power supplies.
Connecting Alarm Relay from Control Box
The AE System comes wired from the factory with an alarm control circuit. This circuit can be connected
to a relay circuit to lock-out water system pumps, sound an alarm, and/or turn on some sort of visual
signal or control.