15
ENGLISH
CARE
STORAGE
CAUTION
• We advise against putting the Viper mandoline in a dishwasher.
• The blades / combs are made of cutlery-grade stainless steel;
washing them by hand will prolong their life. A brush can be used to
clean between the teeth of the julienne combs.
• The blades can also be sharpened.
• Wipe the Viper mandoline thoroughly after washing and store it
away from humidity.
• The storage box for the Viper mando-
line takes the julienne plates (capacity: 3
plates). Just slip the plates along the side
rails inside the box.
• Always leave the slicer plate in place on
the frame of the mandoline when the latter
is not being used, and adjust the thickness
of cut to 0.
• For storage, the storage box with the
plates slides onto the mandoline frame af-
ter the slider (receptacle) is in place.
• The pusher can be disassembled for com-
plete cleaning. An end piece on the top re-
leases the pusher, separating the ergonomic
dome from the rod and freeing the spring.
To remove the end piece, release it by tur-
ning clockwise. However, the needles can-
not be disassembled. The reverse procedure
must be followed to re-assemble the pusher
components.
The Buyer Viper mandoline is a fruit and vegetable slicer that has been designed
and manufactured to give you the greatest safety when you carry out your pre-
paration work. This device uses extremely sharp blades and combs which should
be handled with the greatest care. That is why we ask you to please respect the
following rules for use:
• The slider receptacle and its pusher provide a guarantee of safety. It is
essential to have them in place when using the Viper mandoline.
•
Always handle the frame of the Viper mandoline and the plates by their
designed lifting areas.
• When the mandoline is not in use, leave the slicer in place and set the
thickness of cut to 0.
•
Keep out of the reach of children.
Summary of Contents for 2016.00
