dbx SC 32, Help Manual

Page: 143 / 232

SC 32 / SC 64
139
13) Action - The Action dropdown is where you will choose the Action that the ZC
Controller will complete when adjusted. There are several actions that a ZC
Controller may take. These are driven by the type of Controller. The ZC-9 will
only allow Actions as listed below.
a. Input Select - Selects the input to be routed to an Input or Output
b. Actions Select - Selects any actions to be performed. This may be in the
form of Device Presets, Panel Presets or Venue Recalls assigned to the
eight positions.
14) Router Type - This control allows you to choose the Input Router section or
the Output Router section as the target for the Destination.
15) Destination Selection - This control allows you to choose where you are
routing the assigned Source. Multiple destinations can be selected.
16) Source Assignment - This section determines what will be routed to the
selected destination(s).
Action: Input Select
When Input Select is listed in the Action dropdown list, the following screen will
display. ZC9 in ZC wizard
You will now choose a destination (or multiple destinations) where a Source will
be routed.
Clicking on the Add/Remove button will bring up the following screen.