16
MultiMerge2 User Manual
Audio Output
– A submenu that defines the AUX Output Source for AES 7/8 to display either AUX or
the DownMix LtRt.
Figure 8. Audio Output Screen Display
Aux Output Source
– defines the source of AES 7/8. Selecting AUX will pass AES 7/8 onto this
channel. Selecting DownMix will pass the watermarked LtRt from DownMix onto AES 7/8
Final Limiter
– Enables and disables the final limiter (Default: Enabled)
Final Limiter Ceiling
– Allows NLC5.1ST to reduce the level of output stream (0dB to -20dB)
Settings Menu
Figure 9. Settings Menu Screen Display
Latency Mode
– High and Low Latency are available. High Latency UpMix Algorithm provides a near
discrete 5.1 performance from Stereo.
5.1 Final Limiter
- A final limiter is present to control the absolute waveform peak level for the surround
output. This parameter controls the output peak level in dBFS
2.0 Final Limiter
-
A final limiter is present to control the absolute waveform peak level for the stereo
output. This parameter controls the output peak level in dBFS
Noise Floor
- The Noise floor parameter prevents increasing the noise floor level. Input signals below
the threshold are considering too low and are not managed by the loudness processing to avoid
bringing up the noise level. Input signals above the Noise Floor are considered valid and are managed
by the loudness processing.
