24
MultiMerge2 User Manual
Although your MultiMerge2 will provide you with years of trouble free service, occasionally problems
may occur. Below is a listing of the most common fault conditions.
No Sync
: AES sync has been lost. Please check the source equipment and all cable connections.
Ensure that MultiMerge2 is operating in the proper input mode for your application and is looking for the
source audio on the correct port.
CRC Error
: MultiMerge2 has encountered a CRC error in the audio stream. Check that equipment up-
stream of MultiMerge2 is properly configured to output the correct audio stream.
Validity Error
: MultiMerge2 has encountered a validity error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
Bi-phase Error
: MultiMerge2 has encountered a bi-phase error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
No Parity Error
: MultiMerge2 has encountered a parity error with the audio stream. Check that
equipment up-stream of MultiMerge2 is properly configured to output the correct audio stream.
Firmware Update
