8
MultiMerge2 User Manual
Installation
Immediately upon receiving your MultiMerge2, please make a careful inspection for any shipping
damage. If damage is found or suspected, please notify the carrier at once and then contact your
dealer. MultiMerge2 is shipped in one carton, which contains: the MultiMerge2 unit, an AC power cable,
and this Users Manual.
We strongly encourage you to save the shipping carton and shipping materials supplied with your
MultiMerge2. They are specially designed to properly protect your MultiMerge2, and in the event that
you need to return it for service, only these OEM shipping materials can ensure its safe return to our
factory.
We provide a limited 3-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
www.daysequerra.com
.
Rack Mount Installation
The MultiMerge2
chassis has four rack mounting holes and has been designed to fit in a standard 1RU
space. Plastic ‘finishing’ washers are recommended to protect the painted surface around the mounting
holes. Locate the air vents on each side of the unit, and be sure to keep them clear so the unit may
have adequate ventilation.
Power Connection
The AC power cable supplied with MultiMerge2 must be connected from the IEC320 power entry
module to an AC mains outlet with a functional earth ground connection. For protection against electric
shock and electro-magnetic interference, do not plug the power cable into a ground-lifting adapter or
remove the cable’s grounding pin. If in doubt, please consult a qualified electrician.
Please connect MultiMerge2 to an uninterruptible power supply (UPS) to protect against power
surges and low-voltage conditions.
MultiMerge2
may be combined with other devices on the output
of the UPS as long as the total load is within the UPS’ capacity. Consult your UPS manual for details.
MultiMerge2
will automatically power up when AC power is applied. If AC line power is lost or
momentarily interrupted, MultiMerge2 will revert to its previous state.
