17
MultiMerge2 User Manual
Cross Fade Time
-
Determines the speed at which transitions from UpMix to Pass through mode
occur.
Clock Source
- Will display the port that MultiMerge 2 is using for AES reference timing. This will be
represented as a port number. Internal or external.
Sample Rate
- Displays the sample rate MultiMerge has detected from the clock source.
Network Menu
Figure 10. Network Menu Screen Display
The DaySequerra MultiMerge2 has several configurable network settings. All of MultiMerge2’s network
settings are password protected. The password to change the network settings is “
merge123
”. Please
take note when entering the password that the MultiMerge2 password is case sensitive. The
DaySequerra MultiMerge2 is configured to take a DHCP address by default.
Device Name
- Allows you to change MultiMerge2’s name as reported to DNS. Press ENTER while the
cursor is over this field to go into data entry mode. Turn the knob to scroll through the available choices
of letters (A-Z, 0-9 and _ (underscore)) and press ENTER to move on to the next field. Turning the knob
again will start to scroll through the choices for the next letter, or pressing ENTER accepts the name.
DHCP
- Configures MultiMerge2 to look for a DHCP server for IP configuration. (Enabled or Disabled)
IP Address
- If DHCP is set to disabled, allowing the user to enter the desired IP address manually.
Press ENTER while the cursor is over this field to go into data entry mode. Scroll through the available
numbers (0-255) and press ENTER to move to the next octet.
MAC Address
- Displays MultiMerge2’s MAC address if needed for firewalls or DHCP IP address
assignments.
