50 Installation
(for qualified installers only)
© Travis Industries
4140805
100-01384
Fireback Installation
Firebacks are shipped separately from the fireplace and must be installed prior to installing the crushed
glass. There are three different sizes of firebacks (12”, Divider, and End Firebacks). Depending upon the
type of fireplace, you will need multiple pieces (see table below). Follow the instructions below to install.
Fireback Quantity Needed – Category 1 Fireplaces
Type of
Fireplace
Length
(Nominal)
# of 12”
Firebacks
# of Divider
Firebacks
4.25” Wide)
# of End
Firebacks
(8.625” Wide)
# of Bay
Firebacks
(5.5” Wide)
1-Sided 5’
4’
3’
5
4
3
2
2
2
2
2
2
0
0
0
See Through
Any Length
0
4
2
0
Pier Any
Length
0 2 1 0
Island
Any
Length
0 0 0 0
Full Bay
5’
4’
3’
5
4
3
0
0
0
0
0
0
2
2
2
Side 5’
4’
3’
5
4
3
1
1
1
1
1
1
1
1
1
Fireback Installation Order
Type of Fireplace
1-Sided
(a) Install 12” firebacks (start at ends and work inwards – align if necessary).
(b) Install divider firebacks.
(c) After inner glass is in place, install end firebacks.
See Through
(a) Install divider firebacks.
(b) After inner glass in place, install end firebacks
Pier (a)
Install
divider
firebacks.
(b) After inner glass in place, install end firebacks.
Island
No firebacks, no worries.
Full Bay
(a) Install bay firebacks on both ends (install near end and slide to the outside).
(b) Install 12” firebacks.
Side
(a) Install bay firebacks at the end (install near the end and slide to the outside).
(b) Install 12” firebacks.
(c) Install divider fireback.
(d) After inner glass in place, install end fireback
