48 Installation
(for qualified installers only)
© Travis Industries
4140805
100-01384
Hearth Requirements
A hearth is not required for this fireplace. If a hearth is installed, it must not extend above the glass
opening (we recommend the hearth be a minimum 1” below the glass opening to allow for glass
installation). The hearth may be combustible or non-combustible.
Facing Requirements
Drywall, tile, or other facing (combustible or non-combustible) may be placed directly on the face of
the fireplace (see “a” below).
Facing may be placed along the perimeter of glass opening, but must not extend over it. This area
must remain open to allow for glass removal and installation.
Fireplace must not be used to support the facing. Heavy facing must be self-supporting.
WARNING
: Do not use adhesive to secure the facing. The high temperatures of the
fireplace may cause adhesives to emit odors. Use mastic or thin set (or other non-
combustible, non-odorous adherent) to attach the facing.
NOTE
: Screws may be used to secure cement board or tile backer to the fireplace. Do not
penetrate the fireplace more than 1/2” (13mm).
Adhesive
11"
280mm
See "Dimensions"
12" (305mm)
------- or -------
20" (508mm)
Do not drill screws into this shaded area.
The outer glass slides into this area.
