Davin Toscana-C1b, Service Manual

Page: 92 / 365

5. Click the [Yes] button to start the uploading the address book data from the file to the machine.
While the data is uploading to the machine, you will see "*Please Wait* Setting from PC…" displayed
on the printer operation panel.
6. After the upload has finished, close the Device Setting Utility and cycle the machine off/on.
7. Use the Web Browser to print a list of all dial settings to confirm that all the settings have been restored.
Rear Cover
Preparation
• Remove platen or ADF
• Raise the scanner unit to full upright.
• Remove: (1) duplex unit, (2) paper cassette, (3) paper output tray, (4) right cover, (5) left cover, (6)
scanner unit
1. Remove the ink collector unit cover [1] and pull the ink collector unit [2] out of the machine.
2. On top of the rear cover remove silver screws [3] and [4] (
 x2)
3. On the back of the machine, remove blue screws [5] and [6] (

x2).
4. Position on a table so its rear edge overhangs the edge of the table so you can see the tab locks.
• To prevent ink spillage from the print head tanks, do not turn the machine on its side or on its
front edge.
Common Procedures
91
3