Davin Toscana-C1b, Service Manual

Page: 189 / 365

1. Turn the machine on.
2. [Clear Modes]> [107]> [Clear/Stop] for sec.
SYSTEM Ver.0.51
Service Menu
3. [

] or [

] > "ENGINE MAINT.> [Yes]
SP No.
1000
4. [  ] 4 times> "5000"> [Yes] 3 times
5. [  ] 7 times> "5007"> [Yes]
WASHING
5007
6. [Yes]
WASHING
EXEC
7. Open the right front door, remove the print cartridges, replace them with the cleaning cartridges, then
close the right front door.
8. Confirm that "WASHING" and "EXEC" are displayed, then push [Yes].
9. When you see "OK?" push [Yes].
• "RUNNING" displays while the cleaning sequence executes.
• When cleaning is finished, the display returns to "WASHING" and "EXEC"
• If the "Alert" lamp lights red, this indicates that an error has occurred. At this step you cannot
see the error displayed on the machine operation panel.
• Complete the procedure to return to standby mode, read the number of the error displayed
to determine the cause of the error.
10. [No] 3 times> "Engine Maint."
11. [
 ] or [  ] > "End" > [Yes]
12. The machine switches off.
13. Remove the cleaning cartridges and store the machine.
4. Troubleshooting
188
4