Davin Toscana-C1b, Service Manual

Page: 91 / 365

8. While supporting the upright scanner unit with one hand to prevent it from falling back, raise the latch
[2] to disconnect the support strap.
9. While still supporting the upright scanner unit, pull the USB harness and ground wire out [3] out of
the machine.
10. At the left rear corner [1], pull the scanner power harness, small harness, and ground wire out of the
machine.
11. Lift the scanner unit off the machine and place it on a flat, clean surface.
To upload address book data to the machine:
Do this procedure after the scanner unit has been replaced.
1. Start the Device Setup Utility.
2. From the "File" select "Open".
3. Navigate to the folder where the address book was stored using the "Download" command and open
the file.
4. In the menu bar click [Tools]> [Upload].
3. Replacement and Adjustment
90
3