Davin Toscana-C1b, Service Manual

Page: 122 / 365

• Remove: (1) paper cassette, (2) paper output tray, (3) right cover (unlock the carriage so you can
push it left/right), (4) left cover, (5) scanner unit, (6) rear cover
1. To dislodge the sensor cover pinch the hooks inward [1] to release them as you push on the boss pins
[2].
2. Push the carriage [3] to the right side of the machine.
3. Remove the dislodged sensor cover [4].
4. Remove the sensor [5].
5. Pull out the sensor [6] and disconnect it (

x1).
Reassembly
1. Push the sensor through the hole on the back of the machine.
2. Push the sensor [1] down to lock it in place.
3. Reattach the sensor cover [2].
• The cover cannot pass below the steel shaft.
• With its front edge down, lower the cover between shaft and the timing belt.
4. Slowly move the carriage [3] left and right to confirm that the carriage does not hit the sensor cover.
Sensors
121
3