Datavideo SE-1200MU, Instruction Manual

Page: 38 / 60

38
3. The circular Colour Palette allows selection of a colour for the Bus Matte .
4. Click anywhere on the Colour Palette to move the
crosshair
and display the currently selected Hue or
colour. The RGB values for the selected colour are then shown on the right.
5. The
Luma value
determines how light or dark the selected colour or hue is. Click on the
Luma value
and enter a new value. A small percentage value will make the colour dark and a larger value will make
the colour brighter.
6. The Sat or Saturation value moves the crosshair from the center of the colour palette to the outer
edge of the circle. The Sat value can be finely adjusted by clicking on the Sat value and entering a new
value. If the
Hue
angle is set to 180 degrees (6 o’clock position) then the
Sat
value determines how
much Cyan is in the matte.
7. The
Hue value
moves the crosshair around the colour palette in a clockwise or anti-clockwise
direction. The Hue value/angle can be finely adjusted by clicking the Hue value and entering a new
value.
Certain colour hues can be found at certain angles on the colour palette. For example, Red is 0 degrees
(12 o’clock position), Green is approx. 120 degrees (4 o’clock position) and Blue is approx. 240 degrees (8
o’clock position).
7.5 Clips – Quick Setup
The Clip function allows the user of the SE-1200 MU to add a clip between sources. Before this can be done,
the clip (a series of bmp/png files) has to be imported into the SE-1200 MU.