Datavideo RMC-260, Instruction Manual

Page: 15 / 34

15
4. OSD MENU
The SE-1200MU Control Unit (RMC-260) offers the user an OSD menu to perform several image effect
configurations, such as Picture-in-Picture, keyers, downstream keys, still pictures and etc. The user can
also configure the I/O by selecting the Inputs and Outputs options. In addition, under the setup options,
the user is allowed to set the menu color, size, position and language.
The OSD Menu also gives the user the flexibility to switch between basic and advanced modes. The basic
mode is generally a condensed version of the advanced menu mode. The following sections will show
you the options available in these two modes.
4.1 Start
The “Start” option generally allows the user to set the Transition duration, the Transition type, and
various WIPE effect parameters. The OSD menu display is illustrated in the table below.
Advanced Mode
Start Transition M/E 60 DSK 60 FTB 60
Keyer Type Wipe
Chroma
P-in-P
Wipe Effects Wipe
1
Soft
0%
Width
0%
P-in-P Lite Border Luma 100% Sat 80% Hue 178
Inputs Position X 0% Y 0%
Outputs
Stills Matte Luma 100% Sat 80% Hue 0
User Mems
Setup
Basic Mode
Start Transition M/E 60 DSK 60 FTB 60
Keyer
Chroma
Wipe Effects Wipe
1
Soft
0%
Width
0%
P-in-P
P-in-P Lite
Inputs
Outputs
Stills
User Mems
Setup
Transition
The transition option allows the user to set the transition duration, in frames, for switching to the PGM
view when using the AUTO , DSK and FTB buttons. The sub-options are (AUTO) Mix Effect ( M/E ),
Downstream Key ( DSK ) and Fade-To-Black ( FTB ). If the M/E is set to a value of 50 then the transition will
take effect over a period of 50 frames or roughly 2 seconds. When the AUTO button is pressed, the
transition will take the current M/E value.
The three available transition types ( Type ) are Clip/Wipe/Mix .