Datavideo RMC-260, Instruction Manual

Page: 10 / 34

10
REV
When the REV button is ON then the selected transition will operate in the reverse
direction only.
After the desired WIPE transition effect is selected, the user may turn on the WIPE border by pressing
the
BD MODE
button and apply the border color by pressing the
BD COLOR
button.
BD MODE
Border width increment /
decrement
BD COLOR
Optional color border applied
3.2 Program Source Row
The Program row of buttons is for control of the program output, which is the live output. You can
switch or CUT from one video source to another directly on the Program row. You will see the PGM
output changes as you press different keys along this top row of buttons.
Buttons 1, 2, 3, 4, 5 and 6
: Video source buttons.
BLK button
: Black background for use on the Program row.
BKG button
: Background button that assigns a background color or color bars for use on the Program
row.
STILL button
: Press this button to cycle through Live Video, Freeze and Still.
USER WIPE
: Press this button to swap between User Memory function and WIPE transition function.
WIPE is enabled after USER WIPE button is ON. When the USER SAVE button and the USER WIPE button
are ON at the same time, the
USER SAVE
button will take precendence over the
USER WIPE
button.
STILL
: Press to cycle through Live Video/Freeze/Still of PGM
Note: If you are not sure what you are seeing is Freeze or Still, please enable the Multiview label info.