Datavideo DVD-100, Manual

Page: 54 / 62


This control is used to wind the tape in the remote deck backward.

If the deck is in the stopped mode, the control will wind the tape quickly with no video preview.

If the tape is playing or paused when the wind is started, it will not wind as fast and will provide a video
preview.

This control us used to start the tape in the remote deck playing.

This control is used to wind the tape in the remote deck forward.

If the deck is in the stopped mode, the control will wind the tape quickly with no video preview.

If the tape is playing or paused when the wind is started, it will not wind as fast and will provide a video
preview.

This control will step the video backward one frame at a time.

This control will stop the tape in the remote deck.

This control will step the video forward one frame at a time.

This control will bookmark the current position of the tape using the current timestamp. The value
can also be entered or edited manually in the edit field where it is shown.

Use In/Out Marks for capture
- This control is used to indicate whether IN/OUT marks are to be used
for the job's capture stage.

Segment Number
- Because the deck control feature allows multiple IN/OUT points to be specified, this
control is used to view the IN/OUT points for a given segment or to add IN/OUT points for a new segment.
For inserting and deleting segments, see the user interface on the Deck Control Property Page.

This control will mark the current position of the tape using the current timestamp as an 'IN' point.
The value can also be entered or edited manually in the edit field where it is shown. The mark in point can
used to start the video capture at a specific timecode.

This control will mark the current position of the tape using the current timestamp as an 'OUT'
point. The value can also be entered or edited manually in the edit field where it is shown. The mark in point
can used to stop the video capture at a specific timecode.