The project extension should be used when setting up and saving jobs to run. When a job is run, it will
automatically create a file in the default job directory using the Job ID as the base part of the filename with the
extension *.job. So, it the Job ID's are kept unique, the Job ID will provide somewhat of a record of the jobs run.
The template is a special case of the project file. Unlike the project file, when a template is loaded, not all the
project properties will be changed. For example, if your system is setup to use particular video capture settings,
DVD writer and printers, you can load a project template in without overwriting any of those settings in the current
project. Those system type settings can be saved as default by clicking the 'Save Settings' button and project
templates can be loaded without losing those settings. Generally, the settings that are loaded as part of a template
are those that are set on the following property pages.
Authoring Property Page
Disc Label Property Page (minus the printer and print properties)
Case Wrap Property Page (minus the printer and print properties)
Case/Chapter Insert Property Page (minus the printer and print properties)
New Project
This button will revert to the saved project settings. These are the settings that are saved by clicking on the 'Save
Settings' button at the bottom right corner of the application's main panel.
More
Summary of Contents for DVD-100
Page 1: ......
