Datavideo DVD-100, Manual

Page: 52 / 62

Write Display
The Write display will show the status of the job currently being written. The Writing display page will be
automatically switched to when a job advances to the writing stage.
Video Monitor
The video monitor window serves different functions depending on the hardware of software configuration.
Monitor Controls
The monitor provides the following controls:
This button will minimize the video monitor. To restore the video monitor, simply click on the video monitor
task bar item.
When pressing the small silver buttons to step through the possible options, only the options available for the given
hardware configuration will be given. For example, if only composite and s-video are available for a given
configuration, pressing the bottom left button will alternately show Composite and S-Video but it will not show RGB,
YUV or SDI. These settings can all be made from the encoding page of the job property page dialog. Once a video
capture is under way, these buttons are locked and cannot be pressed until the video capture ends.

Top left button
- is used to select the video standard. Possible options are:

NTSC

PAL

Top right button
- is used to select the aspect ratio of the video. Possible options are:

4:3

16:9

Bottom left button
- is used to select the video input connector. Possible options are:

Composite

S-Video

RGB (Component)

YUV (Component)

SDI

Bottom right button
- is used to select the audio input connector or level. Possible options are: