Settings Sample Points
256k, 128k, 64k, 32k,
16k, 8192, 4098,
2048, or 1024
Specifies the number of points in a scope trace. Default is 4096.
Action required:
Press Sample Points to view and select the nine available sample points.
Time Reference
Lf, Ctr or Rg
Specifies the reference point on the display.
This is the position of the trigger if no offset has been set.
Default is Lf.
Action required:
Press Time Ref to toggle between Lf, Ctr and Rg.
Lf (Left)
Lets you see the waveform after the trigger event.
Ctr (Center)
Lets you see the waveform before and after the trigger event.
Rg (Right)
Lets you see the waveform up to the trigger event
Trigger Source
V1 Level, I1 Level, Arb
Key, On/Off, DIO or
Remote
Configures the trigger source.
Default is V1 Level.
Action required:
Press Trigger Source to select a trigger source. This trigger source will trigger the
scope measurements on all output channels.
V1 Level
Selects the voltage trigger level as trigger source.
Triggers the measurement when the voltage of the
corresponding output passes through the specified level.
I1 Level
Selects the current trigger level as trigger source.
Triggers the measurement when the current of the
corresponding output passes through the specified level.
Arb Key (Arb
Run/Stop Key)
Selects the Arb Run Stop key or [List Run/Stop] as a trigger
source.
On/Off (Output
On/Off Key)
Selects the Output On/Off keys as a trigger source.
IO (DIO Trigger In) Selects any configured digital IO (with Trigger Input function)
as a trigger source.
Remote (Remote
Command)
Selects a remote interface command as a trigger source.
Keysight E36150 Series User's Guide
139
