DSV2+
Turbo
User Manual, Version 1.09
46
Copyright
©
2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
•
Verify that USB 2.0 is enabled on your terminal and that USB via COM3 is selected. Go
to the Control Panel and double click “PC Connection”. On this screen you should see
“USB via COM3”. If not then click “Change Connection”. Click the scroll bar arrow. If
you see the option for “USB on COM3” then select it and click “OK”. Click “OK” again
to close the PC Connection screen. Re-insert your USB cable to get connected. If you did
not see the option for “USB on COM3” your terminal is not USB 2.0 enabled.
