DSV2+
Turbo
User’s Manual, Version 1.09
2
Copyright
©
2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
Disclaimer Notice:
Datastrip Inc., Datastrip Ltd., Datastrip Products Inc., and related operating companies (hereafter collectively
referred to as
Datastrip
) reserve the right to change options, features, specifications, policies, pricing and availability
at any time.
Datastrip
is not liable for errors or omissions in any product related documentation, specifications or
software.
Datastrip
makes no claims of suitability for any particular application.
Datastrip
will not be held liable
for direct or indirect damages or other losses due to loss of data, reliability, or performance issues relating to
Datastrip
-provided equipment or software.
Copyright Notice:
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under section
107 or 108 of the 1976 United States Copyright Act, without the prior written permission from Datastrip. Requests
to Datastrip for permission should be addressed to:
Datastrip Inc.
211 Welsh Pool Road, Suite 100
Exton, PA 19341-1321 USA
or
Datastrip Ltd.
Unit 7, Thame Park Business Centre
Wenman Road
Thame, Oxon, OX9 3XA UK
Acknowledgements:
•
DSV2+
Turbo
is a registered trademark of Datastrip.
•
Windows and WinCE are registered trademarks of Microsoft Corporation.
•
All other trademarked or copyrighted names mentioned herein are the property of their respective owners.
Revision History:
•
Version 1.06 – 3/27/07 – Initial release with all features and functions compatible with Wave 6 software
and current product revisions released March 2007
•
Version 1.06B – 4/20/07 – Updated Spec sheet and added UPEK Sensor Calibration procedure.
•
Version 1.06C – 5/15/07 – Updated Spec sheet, and Appendix A
•
Version 1.06D – 9/4/07 – Added Section 4.7.1. Updated Section 5 to specify that scanners should not be
operated on AC power alone. Batteries should always be plugged in for reliable operation. Updated
Sections 7, 9 & 13.
•
Version 1.08A – 03/03/08 – Updated Sections 13 and 16 for USB 2.0 Active Sync
•
Version 1.08R - 05/02/08 – Updated for regulatory compliance
•
Version 1.09A – 07/19/08 – added compliance statement to Section 10