SECTION 5
5-1
001-4090-101/102
CONFIGURABLE PARAMETERS
5.1 PARAMETER OVERVIEW
The parameters used to configure the Integra-H units are described in the Radio Service Software (INTRSS)
help file. Section 5 summarizes the Integra-H parameter settings and their variations when used within a network.
Refer to help files for descriptions of the above fields.
Table 5-1 Normal Factory Settings (Units)
Fields
Integra-H with Integra-H
Network Settings
Compatibility Mode
Integra-TR
Tx/Rx Mode
Both Tx and Rx
Extended Preamble (ms)
0
Network Speed
9600, 19200, 21400, 25600
Tx Time Out
30 sec ON
Tx Online Diagnostics
Yes
Unit Type
Master
Data Delivery
All
Suspend Period (ms)
0
Activity Time-out (sec)
5
Sleep Mode
Disable (N/A)
COM Port
Device Baud
19200
Data fwd timer
Normal
Parity
8 bit, no parity, 1 stop bit
Break
Ignore break
Xmit Control
DOX
DCD Control
Active
Analog Connector
Analog 1
Input or Fan Control
(Units with cooling option)
Analog 2
Input
Frequency
Transmit
User choice
Receive
User choice
Adjustments
Carrier Sense (-dBm)
105
Power Out
255 (indicates 1 Watts nominal)
Frequency Warp
Grayed out (radio dependent)
Values set at factory can be changed, if
required; hit related test button to
enable field
Deviation
RXA Adjust
