PRODUCT OVERVIEW
1-7
Part No. 001-4090-101/102
1.11.3 COMMON CHARACTERISTICS
The networks described in this section share common characteristics:
1.The network speed (9600, 19200, 21400, and 25600 b/s) must be the same for all stations in a network.
2.Transmission of online diagnostics may be enabled or disabled at any station or stations without
affecting their ability to communicate with other stations.
1.11.4 POINT-TO-POINT SYSTEM
A simple point-to-point connection is shown in Figure 1-3.
Figure 1-3 Point-to-Point System
In this system, the user's equipment (DTE) is set up in a master-remote configuration.
1.11.5 POINT-MULTIPOINT SYSTEM
Basic point-multipoint systems are shown in Figure 1-4:
Figure 1-4 Point-Multipoint System
Using the Integra-H programming software, one Integra-H must be set to “master”. The remaining units in
the network must be set to “remote”. All units are set to “selective” data delivery to prevent remote stations from
hearing each other's responses.
remote
remote
remote
Master
(simplex or half-duplex)
