V180817w
iBoot-G2+ / iBoot-G2S
Page 36
Time and Event Commands
These commands are only available to the
administrator.
get time
Displays the current time and time server (when enabled)
Current Time: 12/10/2015 16:10:41
Timezone: -5
DST: Enabled
Starts the 2nd Sunday of March at 2:00
Stops the 1st Sunday of March at 2:00
Server: nist.time.gov
set time enable <yes | no>
This command enables or disables the use of the time
server and scheduled events.
Note:
When Adding new events through the CLI. Set
this to no to prevent unintended power switching
no
set time server <domain|dotted decimal>
This command is used to set the Address of a network
time server. Domain name or ipaddress
time.nist.gov
set time zone <-12
– 12>
This command sets the time zone offset for the iBoot
location. (East Coast is -5 )
-5
set time dst enable <yes | no>
This command will Enable Daylight Savings Time
no
set time dst start
<week/day/month>-<hour:minute>
This command sets the start time for Daylight Savings.
Second Sunday of March at 2:00 am is default
2/1/3-02:00
set time dst stop
<week/day/month>-<hour:minute>
This command sets the stop time for Daylight Savings.
First Sunday of November at 2:00 am is default
1/1/11-02:00
For the Daylight savings start and stop commands above use the following key:
[ week is 1-5 ] [ day is 1=Sunday;2=Monday;3=Tuesday;4=Wednesday;5=Thursday;6=Friday;7=Saturday ]
[ month is 1-12 ] [ time is HH:MM (using 24 hour format) ]
get events
This command displays all 14 scheduled events as shown below.
Example:
Date Time Repeats Action Outlet
1. 12/17/2015 16:30 every 2 Day(s) Off Main Run
2. 12/18/2015 04:00 every 1 Day(s) Cycle Exp1 Hold
3. every 0 Day(s) On Main Run
8. every 0 Day(s) On Main Run
--clipped--
13. every 0 Day(s) On Main Run
14. every 0 Day(s) On Main Run
set event <1-14> <run | hold>
This command is used to all the event to run, or put the
event on hold. You can hold while programming to
prevent accidental trigger.
run
set event <1-14> date <mm/dd/yyyy>
This command is used to set the scheduled action’s
start date.
set event <1-14> time <hh:mm>
This command is used to set the time the scheduled
action will occur in 24 hour format.
set event <1-14> repeat < minute | hour |
day>
This command is used to set the increments for
repeating scheduled actions
set event <1-14> mult <0-999>
This command sets how often the event will repeat, (as
set above) before the next event. 0 will disable repeat.
set event <1-14> action <on | off | cycle >
This command is used to set the scheduled action.
set event <1-14> outlet <main | exp1 |
exp2>
This command select which outlet will be triggered
del event <1-14>
This command deletes the scheduled action.
