V180817w
iBoot-G2+ / iBoot-G2S
Page 24
Action: Set the event Action; On, Off or Cycle.
Outlet: Set the outlet to be controlled by the event. If Expansion units are linked to Main, controlling Main will
also control the linked Expansion Unit.
Enable: When checked the event is enabled. Unchecked the event is disabled. A disabled event will not
control power, but will recalculate the next attempt should the Date and Time pass when it would have taken
place.
Clear: Clear the scheduled event. (Delete programmed parameters from list)
Click Save to save the current settings. Click Reset to delete any unwanted changes.
7.13. Passwords / User Settings
The iBoot-G2+ supports three modes of user and
password operation.
Login Required: This mode supports both User and
Admin users. Each user has a settable password.
Auto Login: This mode does not require a username
or password for the User level operation. No login
challenge will be required for any mode of operation,
until any setup function is requested. The Admin
username and password is required for any admin
functions.
User Disabled: There is no User account. The
Admin username and password will be required for
operation and setup functions across all modes of operation. This is the factory default mode.
Two passwords are used by iBoot. In the Login Required mode, The User Password allows access to the
control of iBoot, but not to the Setup functions. Clicking on the Setup button allows the Administrator to log in.
Passwords can be up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Username (fixed)
Password (user set)
Administrator
admin
admin
User
user
user
