V180817w
iBoot-G2+ / iBoot-G2S
Page 13
AutoPing Enabled:
If the AutoPing feature is in use, the page will also display
the current status, OK or Failed, for each AutoPing used,
with a counter showing how many times the Action was
triggered. Reset button for the Trigger counters are
provided.
Heartbeat Enabled:
If the Heartbeat feature is enabled, the page will display
the current status, OK or Fail of the Heartbeat, with a
counter showing how many times the Action was
triggered. Reset button for the Trigger counter is
provided.
Navigation Buttons:
Refresh: Use the Refresh button to obtain the latest status
of iBoot. Using your browser's refresh button can lead to
inadvertent power switching. If the time server is enabled,
the time of the last refresh will be shown in the upper right
corner.
Logout: When you are finished with iBoot, click on Logout.
A Goodbye page will be displayed. This page has a URL
link to re-connect with the iBoot. The linkback URL is user
settable. If no linkback is set, the hyperlink will be the
unit’s IP Address.
Setup: To access the Setup page, the administrator
credentials are required. When logged in as User, the
challenge for Administrator credentials will be offered.
6.5.
URL Control
iBoot-G2+ can be controlled directly by sending a completely formed URL through a browser window or HTTP
command. The URL syntax for control is:
http://<address>?c=<channel>&s=<status>&t=<time>&u=<user>&p=<password>
Where:
<address> =
the IP Address of the device, or DNS name that resolves to the IP Address,
Including any HTTP Port if not standard 80
<channel>=
The Channel or outlet to control
1 = Main ; 2 = Exp1 ; 3 = Exp2
<status> =
The status to change the outlet to:
0 = Off ; 1 = On ; 2 = Query only, no outlet change
<time> =
The amount of time to cycle
<user> =
user or admin depending on password used
