V180817w
iBoot-G2+ / iBoot-G2S
Page 11
6. Web Browser Operation
6.1.
Password Protection
iBoot-G2+ uses two username/password credential sets, one for normal
power control (User) and one that also provides access to the setup
functions (Admin). This configuration can be changed to require
Administrator credentials at all times or allow unsecured User level control.
see Passwords / User Settings
section 7.13
.
Default Credentials:
Role
Username (fixed)
Password (settable)
Administrator
admin
admin
User
user
user
Open your browser and enter the IP address of iBoot-G2+ into the address bar. If you have changed the IP
address by any of the methods described, enter that address, otherwise, use the default IP address
192.168.1.254
Enter the username and password when prompted. When the proper username/password is received the
Control and Status Page is displayed.
iBoot-G2+ uses an inactivity timer for security. This timeout is user selectable from 0 to 99 minutes. Setting
to zero disables the timeout feature. When there is no activity for the set time in minutes, the user is
automatically logged out and the username and password will need to be entered again for access. This is to
prevent accidental lockout by leaving the user logged in.
As the iBoot-G2+ allows only one Web user logged in at any time, use caution when disabling the
timeout feature, as it is possible to lock out other users by forgetting to logout. Closing the browser
will not log the user out and will lock out web access. If you do become locked out, access the
iBoot-G2+ via Telnet and reboot the unit, or press the reset button (see Section 11)
When accessing and using the iBoot-G2+ via a web browser, the browser session may remain
authenticated even after logging out. For ultimate security, please close the browser to clear any
authentication artifacts after logging out of the unit.
6.2.
Mobile Browser Support
The web page displayed to the right is for screen sizes 700 pixels wide and
less. The iBoot-G2+ automatically detects the screen size and adjusts the
pages to look appropriate for the mobile browser. Setup options are
available, however some settings will require the phone to be in portrait
mode to be programmed.
