Datamax Prodigy Plus, Operator'S Manual

Page: 36 / 178

Troubleshooting
28 Prodigy Plus
3.3 Printhead Alignment Procedure
Depending on the degree of alignment necessary to your Printhead,
one or perhaps all of the steps mentioned below may need to be
completed.
3.3.1 Label Stock Tracking Adjustment
To ensure that the stock feeds straight use a full roll of 4" (102
mm) or 4.25" (108 mm) wide stock and complete the
following steps:
1. Rotate the Media Guide ‘down’ and install the stock,
keep the Media Guide in the down position.
2. Press the feed button to feed the labels until the stock
begins to track at a stable position.
3. Rotate the Media Guide to the up position and slide
the Media Guide in or out until the inside edge of the
stock is gently resting against the inner Media Guide.