datamax-o'neli H-4212, Operator'S Manual

Page: 87 / 180

H-Class 77
5 Operating, Adjusting and
Maintaining the Printer
5.1 Displayed Messages
During operation the printer (when not in Menu or Test Mode) displays several types of
information:
•
Prompts and Condition Messages (see Section 5.1.1); and,
•
Fault and Warning Messages (see Section 6.1.2).
5.1.1 Prompts and Condition Messages
Prompts appear as the result of an action or when an action is required during operation,
while Condition Messages indicate an operational state.
Prompts and Condition Messages
Displayed Message Description Action / State
ACCESS DENIED
The password used to
access a secured menu was
incorrect. Enter the correct password.
CALIBRATING
SENSOR LEVELS
Media calibration is being
performed. Allow the process to
complete.
CALIBRATION COMPLETE
Media calibration has
successfully finished.
The printer is calibrated.
CANCEL BATCH
ENTER KEY = YES 
The CANCEL or TEST Key
was pressed during a
multiple label job.
Press ENTER to cancel all
remaining labels in the job.
CANCEL REPRINT
ENTER KEY = YES
The CANCEL or TEST Key
was pressed during a fault.
(See FAULT HANDLING /
VOID AND RETRY, Section
4.2.4.)
Press ENTER to cancel the
reprint.