datamax-o'neli H-4212, Operator'S Manual

Page: 67 / 180

H-Class 57
System Settings (continued)
Menu Item Details
COLUMN EMULATION
Allows the column dot count to be adjusted, where:
(XXX – XXX DOTS)

XXX
Is the printed number of dots per inch (or mm)
thereby reducing the width of the produced format;
see Appendix B.

No adjustment occurs at the default setting.
ROW EMULATION
Allows the row dot count to be adjusted, where:
(XXX – XXX DOTS)

XXX
Is the printed number of dots per inch (or mm)
thereby reducing or enlarging the length of the
produced format; see Appendix B.

No adjustment occurs at the default setting.
SOP EMULATION
Allows SOP functions with backward compatibility
when printing legacy model label formats, where:

Two labels will automatically feed to establish the
selected position.

DISABLED Uses the standard print position.
110 (PRODPLUS)
Emulates the Prodigy Plus
®
print position.
220 (ALLEGRO)
Emulates the Allegro
®
print position.
250 (PRODIGY)
Emulates the Prodigy
™
print position.
BACK AFTER PRINT
Determines media movement when a cutter, present
sensor, peel and present, or GPIO is enabled, where:
MODE
Repositions media, where:

DISABLED Movement occurs only when the next label is ready to
print, minimizing edge curling.
ENABLED
Movement occurs according to BACKUP DELAY timing
after a cut, cleared sensor, or SOP to allow fastest
throughput.
BACKUP DELAY (1/50s)
Determines repositioning timing, where:
(0 – 255)

000
Is the specified lapse (in fiftieths of a second) between
new format processing and label retraction.