Datalogic QuickScan I QD24 Series, Product Reference Manual

Page: 190 / 282

Enter/Exit Programming Mode
180 QuickScan™ I QD24XX
China Sensible Code
Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control . Length 1 is the minimum label
length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 217 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character