CBX ELECTRICAL CONNECTIONS
68 MATRIX 120™
ON-BOARD ETHERNET INTERFACE
For Ethernet models, the on-board Ethernet Interface can be used for TCP/IP communi-
cation with a remote or local host computer by connecting the reader to either a LAN or
directly to a host PC. There is no need to use a crossover adapter since Matrix 120™
incorporates an auto-cross function.
A
CAB-ETH-M0x
cable can be used to connect to a LAN.
On the Matrix 120™ on-board Ethernet interface the following communication channels
are available:
•
TCP Client
•
TCP Server
•
UDP Channel
•
FTP Client
The following Fieldbus protocols are also available over the on-board Ethernet inter-
face:
•
EtherNet/IP
•
PROFINET IO
•
Modbus TCP Client
For further details refer to the Help On Line page of the Reading Phase step (Channels)
and (Fieldbuses) in DL.CODE.
USER INTERFACE - SERIAL HOST
The following table contains the pinout for standard RS232 PC Host interface. For other
user interface types please refer to their own manual.
RS232 PC-side Connections
9-pin male connector
25-pin male connector
Pin
Name
Pin
Name
2
RX
3
RX
3
TX
2
TX
5
GND
7
GND
Summary of Contents for Matrix 120
