Datalogic Matrix 120, Product Reference Manual

Page: 69 / 188

PRODUCT REFERENCE GUIDE 55
The table below gives the pinout of the CBX100/500 terminal block connectors. Use this
pinout when the Matrix 120™ reader is connected by means of the CBX100/500:
Group Label Description
Input Power Vdc Power Supply Input V
GND Power Supply Input Voltage -
Earth Protection Earth Ground
Inputs +V Power Source - External Trigger
I1A External Trigger A (polarity insensitive)
I1B External Trigger B (polarity insensitive)
-V Power Reference - External Trigger
+V Power Source - Inputs
I2A Input 2 A (polarity insensitive)
I2B Input 2 B (polarity insensitive)
-V Power Reference - Inputs
Outputs +V Power Source - Outputs
-V Power Reference - Outputs
O1+ Output 1 + opto-isolated and polarity sensitive
O1- Output 1 - opto-isolated and polarity sensitive
O2+ Output 2 + opto-isolated and polarity sensitive
O2- Output 2 - opto-isolated and polarity sensitive
Auxiliary Interface Matrix 120™ has not Auxiliary Interface
ID-NET Matrix 120™ has no ID-NET Interface
Main Interface
RS232
TX
RX
-
-
SGND
RS422 Full Duplex
TX+
*RX+
TX-
*RX-
SGND
* Do not leave floating, see "
RS422 Full Duplex Interface" on page 57
for connection details.
NOTE
To avoid electromagnetic interference when the reader is connected to a
CBX connection box, verify the jumper positions in the CBX as indicated
in its Installation Manual.