Datalogic Matrix 120, Product Reference Manual

Page: 23 / 188

STEP 4 - INSTALLING DL.CODE CONFIGURATION PROGRAM
PRODUCT REFERENCE GUIDE 9
STEP 4 - INSTALLING DL.CODE CONFIGURATION PROGRAM
DL.CODE is a Datalogic reader configuration tool providing several important advan-
tages:
• Intuitive Graphical User Interface for rapid configuration
• Defined configuration directly stored in the reader
• Discovery and IP address setting features to facilitate remote configuration
• Device Monitoring
• Device Driver Installation
To install DL.CODE:
1. On the PC that will be used for configuration (running Windows XP SP3, 7, 8, or 10),
download the DL.CODE mini-DVD.zip file. Extract the files maintaining the folder
structure and run the
start.hta file to access the installation pop-up. Click on the
Install DL.CODE link to run the installation program and follow the installation proce-
dure.
NOTE
NOTE
2. When the installation is complete the DL.CODE entry is created in the Start>Pro-
grams bar under “Datalogic” as well as a desktop icon. Double-click the desktop
icon to run it.
Depending on your Matrix 120™ model, you can connect to DL.CODE configuration envi-
ronment through one of the following interfaces:
Model Interface Instructions
Matrix 120 xxx-x1x Ethernet Configuration STEP 4A
Matrix 120 xxx-x0x USB Configuration STEP 4B
All
Serial Configuration
a
STEP 4C
CAUTION
DL.CODE does not currently support Windows Embedded (often used in
industrial PCs and/or PLCs).
To configure USB model devices, check the appropriate Matrix
USB Driver and/or RS232 Serial Port Driver installation boxes in the
Welcome window of the DL.CODE Installer. In this case it is recom-
mended to reboot the PC after DL.CODE installation.
To perform a “silent” installation (without user input), see the DL.CODE
User’s Guide.