Datalogic Matrix 120, Product Reference Manual

Page: 24 / 188

RAPID CONFIGURATION
10 MATRIX 120™
Step 4A - Ethernet Device Discovery
The following configuration procedure assumes that a laptop computer running
DL.CODE is connected to a factory default reader through the Ethernet port. See Step 1 -
Connect the System.
The User Interface opens and displays a list of all the devices belonging to the Local Area
Network. DL.CODE has a discovery feature to accomplish this task.
Figure 10 - Device Discovery
The discovery feature will also show devices not belonging to the LAN and display them
in gray (see Figure 10).
1. First the device must be added to the LAN by aligning its IP Address to the net-
work. The network administrator should provide valid LAN address(es).
2. Find your device in the list by matching its serial number (SN) then click on the
device wrench icon to open the Device Environment Configuration window.
3. Change the Ethernet Settings (IP Address, Subnet Mask, Gateway Address etc.)
according to the network requirements.
a. All devices can be configured through their Main Serial port. However, through
this interface, configuration is slower than the Ethernet or USB interfaces and
presents some limitations. It is recommended to use the Serial interface for
configuration
only if the other interfaces are not available.