Datalogic ENC-58 PROG, Instruction Manual, Page: 7 / 38

ENC58 PROG
2
Mechanical safety

Install the device following strictly the information in the section “3
– Mounting instructions”.

mechanical installation has to be carried out with stationary
mechanical parts;

do not disassemble the encoder;

do not tool the encoder or its shaft;

delicate electronic equipment: handle with care; do not subject the
device and the shaft to knocks or shocks;

respect the environmental characteristics declared by
manufacturer;

unit with solid shaft: in order to guarantee maximum reliability over
time of mechanical parts, we recommend a flexible coupling to be
installed to connect the encoder and user's shaft; make sure the
misalignment tolerances of the flexible coupling are respected;

unit with hollow shaft: the encoder can be mounted directly on a
shaft whose diameter has to respect the technical characteristics
specified in the purchase order and clamped by means of the
collar and, when requested, the anti-rotation pin.