Datalogic DS8100A, Reference Manual

Page: 91 / 141

SOFTWARE CONFIGURATION
77
8
Parameter Default Setting
Reading System Layout
Device Assignment Alone
Modify&Backup Lon Slave Configuration Disabled (unchecked)
Enable A.S.R. Disabled (unchecked)
Reading Parameters
Beam Shutter Disabled
Overflow Start Ratio 5
Overflow Stop Ratio 5
Reading Mode Reconstruction
Reading Condition Standard
Reconstruction Parameters
Enabled Stacked Code Disabled (unchecked)
Extended
Min Match 0
Position Tolerance 50
Duration Tolerance 50
Min Start/Stop Number 2
Inter Char Gap 8
Addon Start/Stop Overflow Ratio 2
Max distance between EAN/UPC
and Addon (in modules)
20
Scan Line Amplitude
Amplitude Settings Enable Disabled (unchecked)
PackTrack Calibration
Direction 0 (Forward)
PS Offset 0
Data Communication Settings
Host Application Protocol Type Standard
Data Format
Header Tx Start With Data
Termination After No Read Message Enabled (checked)
Message Tx Selection On Decoding
Format Type Standard
Max. Tx Delay After Phase Off Disabled
Code Identifier Disabled
Standard Parameters
Header String <STX>
Code Position Tx Disabled (unchecked)
Code Direction Identifier Enable Disabled (unchecked)
Termination String <CR><LF>
Data Packet Separators <CR><LF>
Code Field Length Setting Variable Length
Main Serial Port
Main Serial Interface Dedicated to ID-NET Disabled (unchecked)
Data Tx Enabled (checked)
Heartbeat Disable