DS8100A REFERENCE MANUAL
116
A
ID-
NET™ GATEWAY
The CBX800 Gateway can be used to integrate a DS8100A reader into a high speed ID-
NET™ network consisting of different scanners not provided with a Lonworks interface.
In this case the DS8100A uses its main RS232/RS485 interface to communicate with the
CBX800.
Figure 105
– DS8100A Slave/CBX800 Gateway in an ID-NET™ High Speed Network
NOTE
For 8K family scanners having software version 6.80 or later, an alternative
fixed speed (57600 baud) ID-
NET™ layout can be made without the use of
the CBX800 provided:
the 8K scanner is only an ID-
NET™ slave device
the ID-
NET™ master is only an SC4000 Controller
See the ID-
NET™ Application Note for details.
ID-
NET™ Slave Nodes
CBX800 Source Interface
CBX800 ID-
NET™ Interface
Reader ID-
NET™ Interface
External Trigger (for On-Line Mode)
Host Aux for CBX800 Configuration
Source Aux for Source Reader Configuration
Reader Auxiliary Interface for Reader Configuration
Ethernet TCP/IP (WebSentinel)
1
CBX800
CBX100
CBX100
2
3
Power
3
4
5
6
DS4800
DS8100A
7
Matrix 400™
7
Serial (Host)
Host 2
Host 1
ID-
NET™
SC4000
ID-
NET™
Master
Summary of Contents for DS8100A
Page 1: ...DS8100A Reference Manual ...
Page 141: ...www datalogic com ...
