Datalogic C-BOX 400, Installation Manual

Page: 32 / 39

C-BOX 400/410
2
GET
– (left button): the C-BOX 4X0 reads the current barcode scanner
configuration and permanently copies it in its own memory support
(EEPROM). The C-BOX 4X0 preserves this configuration also when
switched off.
TEST
- (center button): the C-BOX 4X0 forces the barcode scanner to run the
Test Operating Mode (refer to the scanner Installation Manual for details).
Press any button to quit the Test Operating Mode and restore the barcode
scanner normal operating mode.
SEND
- (
RIGHT BUTTON
):
THE
C-BOX 4X0
SENDS THE CONFIGURATION PREVIOUSLY
STORED IN ITS OWN PERMANENT MEMORY SUPPORT TO THE BARCODE SCANNER
’
S
EEPROM.
NOTE
Once the buttons are released in step 1, a ten-second timeout starts.
If no button is pressed within this time (no function is selected), the
procedure will be cancelled.
The C-BOX 400 warning LED (Figure 17) is turned OFF at the end of
each procedure.
The C-BOX 410 display visualizes self-explaining messages about
GET/TEST/SEND functions.
20