PROGRAMMING COMMANDS
3
2
2.2 DISCONNECTION FROM DEVICE
DESCRIPTION
HOST
COMMAND REPLY
MESSAGE
1 Exit Programming Mode
<ESC> d M <B0
H
> ADDR
<ESC> d <CR><LF>
Where
ADDR
is the address of the device in an LONWORKS Master/Slave layout.
This message must always be transmitted to exit from programming mode.
2 Exit Terminal Mode
<ESC> I A <space>
<ESC> K <CR><LF>
This message must always be transmitted to exit from Terminal mode.
3
Exit Host Mode
<ESC> [ A
<ESC> X <CR><LF>
This message must always be transmitted to end the programming session.
From now on device is in
IDLE
state. Communication channel may be used for
normal data flow.
Summary of Contents for 6K-8KA FAMILY
Page 1: ...6K 8KA FAMILY Host Mode Programming ...
Page 4: ...iv ...
Page 73: ...www datalogic com ...
