PROGRAMMING STRINGS
11
3
3.2 HOW TO SEND SINGLE PARAMETER TO THE READER
NOTE
To guarantee the complete compatibility with future software releases, It is
strongly suggested to use the shortcuts programming strings.
Using Complete Parameter Path
The '
Set Parameter
' programming string must have the following format:
SP
<space>
PATH
:
VALUE
<CR><LF>
Where:
SP
:
'Set Parameter' command
PATH
:
Complete Parameter Path
VALUE
:
Parameter Value
After entering this command, the device responds with the proper reply message and then
waits for one or more programming strings.
If the programming is correct, the device updates the configuration and confirms with the
following message:
Y
<space>
VALUE
<CR><LF>
Where:
VALUE
:
Parameter Value
If programming contents are wrong (i.e. a typing error in the file) or due to a transmission
error, the device replies with the following message and programming data will not be
updated in this case:
N
<space>
ERRCODE
<CR><LF>
Where:
ERRCODE
: Error Code (signed DEC value)
For information on Error Codes see the "Error Codes Table" in the Appendix.
Summary of Contents for 6K-8KA FAMILY
Page 1: ...6K 8KA FAMILY Host Mode Programming ...
Page 4: ...iv ...
Page 73: ...www datalogic com ...