DKG-379 User Manual Rev_02
V-15
(24-12-2012)
K43D01-EN - 31 -
The unit features 100 event logs with date-time stamp and full snapshot of measured values at the moment
that the event has occurred.
Stored values in an event record are listed below:
Genset phase voltages L1-L2-L3
Genset phase currents L1-L2-L3
Genset frequency
Genset active power (KW)
Genset power factor
Engine rpm
Oil pressure
Coolant temperature
Fuel level
Battery voltage
Mains phase voltages L1-L2-L3
Mains frequency
Digital input statuses
Charge input status
J1939 VAlues (if applicable)
-event number
-event type / fault definition (see below for various event sources)
-date and time
-operation mode
-operation status (on-load, on-mains, cranking, etc...)
-alternator voltage DC
-battery bank voltage DC
-alternator current DC
-genset active power (kW)
-battery bank temperature
-oil pressure
-engine temperature
-fuel level
-oil temperature
-canopy temperature
-ambient temperature
-engine rpm
-battery voltage
-charge voltage
-module internal temperature
Event sources are:
-Shutdown alarms, Load dump alarms, Warnings
-Periodic records.
8. DISPLAYING EVENT LOGS
