3 Installation
Clarity Hardware
of the wiring, we supply a
SV9 Terminal board
with screw contacts for
INT7
,
INT9
,
U-PAD
,
U-PAD2
,
Colibrick
and
Net PAD
A/D converters.
Note:
This
SV9 Terminal Board
is not suitable for applications with small
signals or with high electromagnetic interference. This is because the
SV9
Terminal Board
uses leads and screw contacts that are not shielded.
3.3.2 Connection of starting cables
Starting input reacts to a change of the TTL level (5 V / 0 V) or to a
connection by any contact (button, contact of relay).
The input implicitly reacts to a change from
HIGH
to
LOW
(or closing of a
contact). The input function may be altered by changing the
Down
option
to
Up
in the
External Start/Stop
section of the
-
dialog (accessible from the
window using the
Method
-
Measurement
command).
For schemes and hints describing the typical autosampler wiring, please
see the
Connecting Autosamplers
chapter of the
Getting Started
Manual
.
- 8 -
