Copyright © 2008 – 2019 DARE!! International
Page 20
4.
The new driver can be configured by double clicking the driver and press the
‘Advanced’ button. Another window opens, where you can select the
communication tab and choose the control interface. In this example, we use
USB.
5.
To enable the USB communication, make sure the RadiSense probe is connected
to the PC USB port and press the ‘Detect’ button. After pressing ‘Detect’ the
Device Identifier (ID) will be updated with the unique ID number. Make sure that
there is no other DARE!! product connected to the same PC using USB.
6.
For controlling the RadiSense probe from a RadiCentre single slot (CTR1001S) select
under the tab “RadiCentre” the “RadiCentre 1”
