Copyright © 2008 – 2019 DARE!! International
Page 14
2.7
Probe stand
The RadiSense 10 is supplied with a PST2000A probe stand consisting of the following parts:
Base
Feet (3 pcs)
Pole (3 pcs)
Angle mount
The probe stand parts can be easily assembled together. The 3 feet can be screwed into the side
of the base. The probe stand can also be used without these feet. Three poles with different size
are delivered to mount the probe at either 50 mm, 100 mm or 150 mm height. Screw the pole
into one of the two holes of the base. Using this appropriate probe stand pole with the feet, the
probe is automatically positioned at the desired height above the surface and can be easily
positioned 100 mm from the edge of a table.
