Page 25 of 30
5.6 Rigid Arm Adjustments
The X740 light is mounted on spring-tensioned rigid arms which are balanced
specifically to be able to be moved using a single finger touch. Your light will have
been balanced during manufacture, so there should be no need for you to make any
adjustments out of the box.
Over time, you may experience a small amount of drift. This is where the arm
appears to move by itself and does not settle in the required position. This can be
rectified by adjusting the spring tension on the arm.
Next to the light head, on the left side of the arm systems, you will find an
adjustment knob. Turn the knob clockwise in small increments until the arm achieves
balance.
Warning! These arms are under spring tension, as such do not try and
adjust the internal mechanics of the arms.
If you experience any other issues that cannot be solved with the above steps, please
contact DARAY Service Delivery Team on 0800 804 8384.
Tension adjustment knob
