P
AGE
42
46512-0999 <90-00083>
2.
Press Enter. The first of the two derived display editing screens
appears:
3.
In the Description field, enter a description (optional) that identi-
fies the derived display.
4.
Press Enter.
5.
In the MAP Dsp field, type the location in the MAP’s memory
where you want to store the derived alarm information. The num-
ber can be from 1-128.
6.
Press Enter.
If the memory area has been assigned already, the message
Memory Conflict - any key to cont: appears. Enter a different
memory location in the MAP Dsp field. If you have difficulty locat-
ing unused memory locations, refer to the Memory Available Re-
port in the Reports section of this chapter.
If you are creating a derived display, the T/Shell program enters
the values of D in the MAP Alarm Levels field and advances to the
second of the two derived display editing screens.
MAP SYSTEM DEFINITION
CONTINUED
. . .
