P
AGE
24
46512-0999 <90-00083>
10.
The cursor moves to the next line. The computer assigns the next
consecutive memory location to the MAP Dsp field. If the next con-
secutive memory location is being used, you must type a number in
the MAP Dsp field. Fill in the MAP Dsp and MAP Alarm Levels
fields for as many alarm displays as you need.
11.
When you finish, press F8 to save the information.
12.
Repeat steps 1-11 to configure additional DCP or DCPF devices.
E
DIT
To edit a DCP or DCPF definition:
1.
Press the N (Next) or P (Previous) key until you find the DCP or
DCPF device that you want to edit.
2.
Highlight Edit.
3.
Press Enter. The Edit DCP menu appears.
Instructions for editing the device description, and the memory and
alarm levels appear below.
EDIT DESCRIPTION
To edit a description:
1.
Highlight Edit Description.
2.
Press Enter.
3.
In the DSCR field, type a new description of the device.
4.
Press Enter.
EDIT MEMORY AND ALARM LEVELS
To edit the MAP display number or alarm levels:
1.
Highlight Edit Memory and Alarm Levels.
2.
Press Enter.
3.
Select the MAP Dsp number that you want to change. To select the
MAP Dsp number
Use the up and down arrow keys
- or -
Press F1 and type the number of the Dev Dsp where you want to
move the cursor.
4.
Change the MAP Dsp number.
5.
If you do not want to edit the MAP Alarm Levels, press Enter and
then F8 (Finish). Do not perform the remaining steps.
MAP SYSTEM DEFINITION
CONTINUED
. . .
