P
AGE
16
46512-0999 <90-00083>
E
DIT
P
ORT
C
ONFIGURATION
This option lets you change the protocol, baud, parity, stop bits,
and word length on the data port.
To change a data port’s parameters:
1.
Highlight Edit Port Configuration.
2.
Press Enter.
E
DIT
P
ROTOCOL
This option lets you change the protocol.
To change the protocol:
1.
Highlight Edit Protocol.
2.
Press Enter.
You cannot change protocols except to toggle between DCP and
DCPF protocols. If you need to change to a different protocol, you
must delete the port and then reselect the port.
3.
Use the Tab key to select DCP or DCPF protocol.
4.
Press Enter.
E
DIT
B
AUD
This option lets you change the baud.
To change the baud:
1.
Highlight Edit Baud.
2.
Press Enter.
3.
Use the Tab key to select a baud.
4.
Press Enter.
E
DIT
P
ORT
D
ETAIL
This option lets you change the parity, stop bits, and word
length. To change the parity, stop bits, and word length:
1.
Highlight Edit Port Detail.
2.
Press Enter.
3.
Use the Tab key to select the type of parity.
4.
Press Enter.
5.
Use the Tab key to select one or two stop bits.
6.
Press Enter.
N
OTE
:
If you are selecting a baud
rate for a MAT or a CPM, do
not use 19,200 baud.
N
OTE
:
Do not change the default set-
tings if you are configuring
MATs or CPMs.
MAP SYSTEM DEFINITION
CONTINUED
. . .
